Turbocharger upgrade

Stage 2 Turbo Upgrades and Hybrid Turbo Repairs | NERINGS

NERINGS · Stage 2 and hybrid turbos

Stage 2 turbo upgrades
and repairs

More air for your engine. We convert standard turbos into hybrid units by fitting a larger billet compressor wheel and machining the compressor housing to suit.

To receive an offer, simply send the turbo part number or a photo of its identification plate. We can upgrade your own turbo or supply an upgraded unit from our stock.

An upgrade tailored to your turboBillet compressor wheelMore than 5,000 turbos repaired annually

What does Stage 2 mean?

A standard turbo. Greater potential.

For a Stage 2 conversion, we install a larger billet compressor wheel machined from an aluminium blank and bore out the compressor housing to match the new wheel. Its size is selected to suit the turbo’s design and the target power output.

This type of modified turbocharger is often called a hybrid turbo. Stage 2 is not a universal technical standard — the scope and components are agreed individually for each turbo.

Upgrades and repairs

What do we do to your turbo?

01

We inspect the turbo’s condition

Before upgrading, we assess the CHRA core, rotor, compressor wheel, housings, variable-geometry mechanism and actuator as applicable. We identify parts that need replacing and determine whether the turbo is suitable for an upgrade.

02

We fit a larger billet wheel

We select a larger compressor wheel machined from an aluminium blank. Its size depends on the turbo design, intended load and target power.

03

We machine the compressor housing

We machine the aluminium compressor housing to suit the new wheel, taking account of the housing’s limits and compatibility with the other turbo components.

04

We balance, adjust and test

After replacing components, we carry out the required balancing of the rotating assembly. Depending on turbo type, we check and adjust the geometry and actuator, then perform final testing.

Standard versus billet wheel

How does a standard turbo differ from a billet upgrade?

Below is a real comparison of a standard cast compressor wheel and a machined billet wheel, showing the component we change during the upgrade. The billet wheel in this image is shinier, with visible machining marks. Surface shine alone does not determine turbo performance.

Standard cast and machined billet compressor wheel comparison
What are we comparing?Standard turboCustom Stage 2 upgrade
Compressor wheelFactory wheel size and blade shape. Depending on the model, the wheel may be cast or already machined from solid at the factory.A larger billet wheel, with size and design selected for the individual turbo.
Compressor housingMatched to the standard wheel size.We bore out and adapt the housing to the new wheel.
Air supplyDetermined by the factory turbo design and operating range.Greater airflow potential depending on wheel size, blade shape and the complete turbo configuration.
Engine management calibrationFactory ECU calibration for the standard setup.Appropriate ECU calibration is required to use the upgrade’s potential.

Important: a billet wheel alone does not guarantee more power. Its size, blade shape, compatibility with the turbo and engine calibration determine the result. Standard turbos may also have factory-fitted machined wheels.

CNC machining of a billet compressor wheel
CNC machining of a billet compressor wheel.

A NERINGS upgrade example

BMW 3 Series (E90) 325d — turbo 758352

Comparison of the standard and NERINGS Stage 2 hybrid turbo for the BMW 3 Series (E90) 325d with an original power range of 145–170 kW. The upgrade, together with suitable ECU calibration, can provide approximately 40–60 bhp of additional power. The final result depends on the ECU remapping or chip tuning, including boost and fuelling calibration, as well as engine condition and the rest of the setup. This is an indicative gain, not a guaranteed result.

BMW E90 325d turbo 758352 — standard versus NERINGS Stage 2 hybrid
Standard and NERINGS Stage 2 hybrid turbo comparison. Wheel dimensions and upgrade specifications are confirmed in your individual offer.

Power and ECU tuning

An indicative 30–60 PS increase —
with a suitable setup and calibration

The upgraded turbo can supply more air to the engine. To use this potential and achieve a power increase, it also requires professional chip tuning or engine control unit (ECU) remapping, with boost pressure and fuel delivery adjusted accordingly.

The indicative power increase is 30–60 PS (metric hp), where the engine and turbo configuration allow it. Results depend on engine condition, supporting modifications and ECU calibration; this gain is not guaranteed for every car.

We can also help with ECU remapping on your car. The scope and costs of the turbo upgrade and tuning are agreed individually.

Already upgraded turbos

Stage 2 and hybrid turbo repairs

If an upgraded turbo whistles, leaks oil or loses power, the fault must first be diagnosed. Similar symptoms can also come from other engine components.

INSPECTION

We identify the actual configuration

The Stage 2 label alone does not tell us which parts are inside. We inspect the fitted compressor wheel, CHRA, housing machining and the condition of the other assemblies.

REPAIR

We agree a rebuilding solution

Depending on damage and parts availability, we offer repair or rebuilding. If you know the previous upgrade specification, wheel dimensions or part numbers, please send those too.

Turbocharger manufacturers

Garrett, BorgWarner, Holset and other turbo brands

We repair turbochargers from leading manufacturers. Stage 2 suitability is assessed for the individual model — not every turbo supports the same upgrade.

GarrettBorgWarnerMitsubishiIHIToyotaSchwitzerKKKHolsetContinentalBosch Mahle Turbo Systems

From your idea to an offer

How to request a turbo upgrade or repair

01 / SEND THE DETAILS

Turbo part number or plate photo

The turbo part number or a photo of its identification plate is enough. We will use this to assess upgrade options and prepare an offer.

02 / CHOOSE YOUR OPTION

Your turbo or one from our stock

We can upgrade your existing turbo or supply an upgraded unit from stock. If you have a target power output or other modifications, tell us about those too.

03 / RECEIVE AN OFFER

We agree the work and price

We assess the upgrade or repair options and prepare an offer. Final scope, price and turnaround are confirmed after inspecting the turbo.

Turbos and spare parts

Browse our online shop too

Search for a turbo by VIN, Latvian registration number, vehicle make, model and engine, or turbo part number. Confirm suitability for your Stage 2 upgrade with our specialists.

Turbocharger spare parts

CHRA cores, compressor wheels, variable-geometry mechanisms, actuators and repair parts.

View turbo spare parts →

Before the upgrade

Frequently asked questions

How much does a Stage 2 turbo upgrade cost?

The price depends on turbo model, condition, chosen wheel and housing machining required. The turbo part number or a plate photo is enough for an offer. We confirm the final price after inspection.

Can you upgrade my existing turbo?

We assess feasibility based on the turbo model, design and condition. We check whether the housing and other assemblies suit the planned upgrade. Send your turbo part number and, if known, your target power.

Is ECU tuning needed after the upgrade?

Appropriate ECU remapping is needed to use the upgraded turbo’s greater airflow potential and achieve a power increase. We can also help remap your car’s ECU, with calibration suited to the upgraded turbo.

Will I gain 30–60 PS?

This is an indicative potential gain with a suitable engine and turbo setup. Actual results depend on engine condition, other modifications and ECU calibration. This gain is not guaranteed for every car.

Do you repair hybrid turbos upgraded elsewhere?

Yes. We assess repair options for existing Stage 2 and hybrid turbos. First, we check their actual configuration and damage. Include any previous upgrade details with your enquiry.

How long does a turbo upgrade or repair take?

A turbo upgrade or repair usually takes 1–2 working days. We confirm the exact turnaround when preparing your offer.

Get an individual offer

Send your turbo part number.
Receive an upgrade offer.

For an offer, email the turbo part number or a photo of its identification plate to [email protected]. We can upgrade your own turbo or supply an upgraded unit from stock. For a repair, briefly describe the problem.

NERINGS · Stage 2 turbo upgrades and repairs · Baldone · Serving customers throughout Latvia

Cart

Your cart is empty.